Welcome! Take a virtual stroll through our factory – no shoes required! Let's go

Aluminum Z-Section Weight Calculator

Accurately calculate Z-profile Z-Section Z bar aluminum weight, supporting various flange width, height and thickness specifications

Enter Z-section Parameters

Top Flange Width (b₁)

Bottom Flange Width (b₂)

Web Height (h)

Top Flange Thickness (t₁)

Bottom Flange Thickness (t₂)

Web Thickness (t₃)

Length

Aluminum Alloy Grade

Quantity

Calculation Formula:

Cross-section Area = b₁×t₁ + h×t₃ + b₂×t₂

Weight = Cross-section Area × Length × Density × Quantity

Where: b₁-Top Flange Width, b₂-Bottom Flange Width, h-Web Height, t₁, t₂, t₃-Thickness of each part

Top Flange Width	Bottom Flange Width	Web Height	Thickness	Theoretical Weight(kg/m)	Action
20mm	20mm	20mm	3mm	0.486kg/m	Contact
30mm	30mm	30mm	4mm	0.972kg/m	Contact
50mm	50mm	50mm	6mm	2.430kg/m	Contact
25mm	25mm	25mm	3mm	0.607kg/m	Contact
40mm	40mm	40mm	5mm	1.620kg/m	Contact
80mm	80mm	80mm	8mm	6.221kg/m	Contact
100mm	100mm	100mm	10mm	9.720kg/m	Contact

* The above weights are calculated based on aluminum alloy density of 2.7 GCM

* Actual weight may vary depending on alloy composition

* It is recommended to select the corresponding density according to the specific alloy grade for accurate calculation

Calculate the weight of aluminum Z-profile profiles

Calculate the weight of T-shaped aluminum profiles

Calculate the weight of U-shaped aluminum profiles

Calculate the weight of H-shaped aluminum profiles